Product Information
This is the Havoc Pro Brushless Electronic Speed Control and Ballistic Brushless 10.5 Turn Motor from Novak. FEATURES:
Motor- Completely rebuildable allowing upgrades or replacement of various parts Easy to adjust timing assembly Meets ROAR and IFMAR specifications 12.3mm nickel-plated sintered neodymium rotor for maximum performance in high-temperature conditions 0.125" (3.2mm) pinion shaft accepts all existing pinion gears Sensor-based for excellent torque and low-speed driveability Heavy duty solder tabs with preattached 14 gauge copper strand silicone wire
ESC- Nine adjustable parameters: Minimum Brake, Drag Brake, Dead Band, Minimum Drive, Throttle Curve, Brake Frequency, Reverse Motor Rotation and Battery Pack Selection (Li-Po, Li-Fe, Ni-MH) Locked rotor detection and thermal overload protection (when used with a Novak sensored brushless motor) Clear cooling fan (NOVC5648) mounted on factory-installed heat sink One-touch set-up for quick, easy transmitter setup Radio-priority and polar drive circuits 120 day limited warranty on both components through manufacturer INCLUDES:
Ballistic Brushless 10.5 Turn Motor with sensor wire, zip ties, Havoc Pro ESC, cooling fan, shrink wrap and instruction sheets SPECS: Motor- Watts: 235 kV: 4200 RPM/volt (unloaded) Sensor Harness Length: 9" (230mm) Motor Size: 2.07 x 1.41" (52.6 x 35.8mm) Motor Weight: 6.6oz (187g) Maximum RPM: 50,000
ESC- Input Voltage: 2S Li-Po cells, 2S Li-Fe cells or 4-6 NiMH cells (1.2V/cell) Size: 1.16 x 1.49" (29.5 x 37.8mm) Weight (without wires): 1.36oz. (38.5g) Design: Sensor-based Motor Limit (brushless): All 3.5-turn Novak 540-size sensored brushless motors On-Resistance (brushless): 0.00040 ohms @ 25°C trans. temp. BEC: 6.0 volts DC / 3.0 amps Rated Current: 540 Amps @ 25°C trans. temp. Braking Current: 540 Amps @ 25°C trans. temp. Status LEDs: 4 Voltage Cut-Off: 6.25V (Li-Po), 4.75V (Li-Fe) Power Wires: 14G super-flex copper-strand silicone wire
Be the first to review this product!
Price: $209.99
$159.99